About rupesh00111

rupesh00111 · 06-14-2020

I have old network of 4500, 3K, 2k switches with legacy licensing ( IPBASE, LANBase, Enterprise etc... ). I want to add these devices to DNAC for Assurance.Do I need to buy any additional license to add these devices in DNAC?If I buy these device wit...

rupesh00111 · 01-09-2019

Hello Experts, We are deploying ForeScout server in our global environment to prevent unauthorized clients connection in the network. For this purpose it is required to add ForeScout server IP as IP-helper address on all VLANs SVI configured on Core ...

rupesh00111 · 03-07-2018

Hi Experts, Regarding IP base license I have below question...pls help. 1. Is IPBASE License free of cost for all Catalyst Switches ? or it is free of cost for Catalyst 4500 series switches only? 2. if it is free of cost can I upgrade all of my C...

rupesh00111 · 03-06-2018

Hi Experts, We are planning to convert 2 Layer (Core and Access) LAN topology to 3 Layer (Core-Distribution-Access) hierarchical model. All L3 interfaces will be moved from Core to New Distribution layer. Please find attached topology I am testing in...

rupesh00111 · 11-18-2017

Hi Experts, I Have Just started actual hands on in Cisco Switching. Now I have to add new Cisco 4510 RE switch in our production network which is two layer topology (there is dual core of 6509 and distribution/access switches of 4500 series ). so...

rupesh00111 · 01-23-2019

Find below checklist1. Make new switch iOS same as stack iOS2. Make new switch stack priority lowest3. When connecting new switch in stack make sure it is power off , then do stack cabling , once cabling is complete poweron the new switch.

rupesh00111 · 01-23-2019

Apply below commands and see if any differenceVtp mode transparentSpanning-tree vlan 1-4094 priority 61140Note : do not test in production time

rupesh00111 · 01-09-2019

Hi paul,there will be unauthorised users where plugin will be missing. for such user DHCP request forwarded to Forscoute will be useful. AlsoI believe in Cisco switches, switch will send DHCP request to all IP-Helper address in configuration primary...

rupesh00111 · 03-08-2018

Hi Deepak and Mark Thanks for your reply....! @deepak As of now I have got IPBASE License from TAC for 4503, 4506, 4510 even if IPBASE was not mentioned in Cisco record for those switch serial numbers. TAC provide me the license file mentioning it...

rupesh00111 · 03-07-2018

Hi Bradley, Thanks for our reply. I will test both the options and will keep posted here. Best Regards, Rupesh

Member Since	‎05-13-2017 02:41 AM
Date Last Visited	‎01-03-2021 07:48 AM
Posts	14

User Statistics

User Activity

License needed for adding Old Switches to DNAC

Adding additional IP-helper(non-DHCP server IP) can affect existing setup

Is IPBASE License free of cost for Catalyst Switches ?

VLANs in Cisco 3 layer hierarchical model

Checklist to Add New 4510 RE Switch safely in Production Newtwork.

Re: Add a new 2960X with different IOS version but same stack protocol version to existing stack

Re: PROBLEM OF CORPORATE NETWORK

Re: Adding additional IP-helper(non-DHCP server IP) can affect existing setup

Re: Is IPBASE License free of cost for Catalyst Switches ?

Re: VLANs in Cisco 3 layer hierarchical model