Please help with below issue.
Task - To send mobile calls from below VGW to VGW02 (10.26.XXX.XX)
Issue - Outgoing dial peer hiting as 2109 pots. I want to hit 4004 voip dial peer for mobile outbound calls.
VGW Config
IP Phone DN - 888663018901Cal...
Hello Experts,
How can we create redundancy for incoming to my PRI.
Scenerio - I have one 4331 VGW with one PRI (PRIMARY) (573-XXXX and 588-XXXX) ranges. Now I want to add another 3945 VGW and add one new PRI (Secondary) ( with same DID ranges) w...
Hello Experts,
Need your help/suggestions, I want to migrate one UCS C220 M3 to different site, it is hosting one VM with CUCM subscriber (5329 devices).
What should be the procedure to go with this movement, considering it will involve IP change...
Hello,
Please help me design IPT/Network design as per below requirements.
I am planning to do it with Centralized multisite SRST model.
scheme of physical connections diagram showing a logical architecture description of the protocols used L2 /...
Hello Saurabh / Dennis ,
Both are H.323 VGWs.
For Outbound - I will add second gateway (VGW2) and one more gateway from another site in Route Group for redundancy (I believe the caller ID will get changed).
For Incoming - What is the difference...
Thanks Jamie. As a PDI TA can you suggest the hardware model and quantity to be used in this type of scenario ?
Which UCS and how many publisher and subscriber. - for 10,000 users ?
gateways and switches at HQ with 5000 users ?
Gateways - at remote s...