Hey colleagues I have PI of the latest version 3.9 and I'm currently working on creating a couple of maps. I have nice and clean floor plans which were scaled appropriately by using the scaling tool. I have columns in my building so I'm not sure how ...

Hey everyone.I have an issue with a brand new ISE 2.6 distributed deployment which I upgraded to the patch 6.I added a first group of network devices and configured a test Device Admin policy. The authentication works perfectly however there're no lo...

Hello colleagues, Overview:5508 WLC, 802.1x SSID + Radius on Cisco ISE 2.3.  ISE features in use: Radius (No profiling, etc. Just AAA), Tacacs. Issue: Cisco ISE consumes 388 base license while having only 47 active endpoints. As it was stated multipl...

Hello colleagues, WLC 5508 / 2504 8.3.112 PI 3.2 SNMPv3 AuthPriv I haven't found any way to restrict the SNMPv3 communication with an ACL that points to NMS/32. However, it's possible for SNMPv2c via config snmp community ipaddr ip-address ip-mask na...