About VKStephanie

VKStephanie · 09-25-2017

Hello Everyone, We want to have multiple SSIDs for different sections of the company, each on their own VLAN. So far, I have each of these up and running. However, on one half of the building, users can't get a DHCP address from the main switch whe...

VKStephanie · 05-24-2017

Hello everyone, I did a search and found partial solutions for this... but the code they recommended isn't recognized on my switch. After a few weeks of banging my head against the wall, I'm ready to ask for help. Here's the situation: We have a net...

VKStephanie · 09-25-2017

Yes, they are! I've removed the secondary DHCP pools and all is working as planned. Thank you so much!! You've been a real help.

VKStephanie · 09-25-2017

So adding the vlans to that port 44 seems to have resolved the routing and DHCP issue (Huzzah!)... but now it takes quite a while - almost 30 seconds in some cases, for a user to authenticate before being assigned an IP. Is there a way to speed this ...

VKStephanie · 09-25-2017

I think I see the issue. This first port, 44, need to be trunked to allow traffic from the VLANs 40-45, right? I'll give that a try now. .. but if that's the case, why don't my other VLANs (cleared from the configs below for clarity) need to be on th...

VKStephanie · 09-25-2017

Thank you for your reply, Seb! They are in layer 3 mode.The fw one was sanitized a bit. I can see the route is using the primary and not the secondary pool IP at all... is there a way to point both to the firewall? Or point .14 to the .11? Swith wit...

VKStephanie · 09-21-2017

It's super old, but I have this same problem... Did you ever get a resolution?

Member Since	‎05-24-2017 12:56 PM
Date Last Visited	‎08-15-2018 12:11 PM
Posts	10

User Statistics

User Activity

Routing between VLAN and Firewall - SG300

Segregating a VLAN from the rest of the network

Re: Routing between VLAN and Firewall - SG300

Re: Routing between VLAN and Firewall - SG300

Re: Routing between VLAN and Firewall - SG300

Re: Routing between VLAN and Firewall - SG300

Re: I am not sure if I understand