Curious if anyone has built or setup a solution that allowed you to bridge multiple FXS ports in one simultaneous call? We have a paging system with a unique campus setup where each of the units is a master for that building but does not connect to ...
Just to add some notes on the issues we experienced related to this bug - we had one-way voice audio issues (outbound from the site so our users could not hear it) where audio was garbled, missing, or sounded like wind blowing over the audio. We hav...
CMS is not part of our current architecture, but that sounds like an interesting idea to consider. I did find this device:https://www.tccomm.com/FiberOpticProducts/Products/Broadcasters-Bridges/Phone/246/Emergency-Phone-Line-Bridge-Crash-PhoneWe are...
This is the issue/correct problem that I have - I can do the hunt group setup of course, but that allows only the first member that answers to get the call and these are head end devices where I want each of them to answer and have the active call at...
This setup seems counter productive if I understand all of the community comments. If you have to create multiple entries - for groups and for users, I don't get the point of the groups add at all unless the OU has different users than the group pro...
Curious if this can be done with three zones - I get the Standard and Closed if you just need business hours and off business hours, but I need three global regions AMER/EMEA/APAC - I agree the call handler is simpler, but even though there are more ...
Thanks. I did find a link where Leslie Long recommended to use the spring to push the rubber gasket back in place and it works great - see pic attached and link below. http://atc.go0se.com/?p=1034I took one of the 7961 phones apart, removed the rubb...
