Hi Amit,You could use free tools like MRTG to monitor the historical Bandwidth on Network and FC Uplinks, Connections to the IOM and Server NICs. Please find the white paper attached which explains steps to configure and use.In the UCSM Manager you c...

Hi Barry,Your iSCSI vNICS are overlayed on top of the regular vNICS and the traffic from these vNICS will go through the ethernet uplinks, to me it clearly sound like some uplink network issue, to simplify things just use one vNIC and just one single...

You could use free tools like MRTG to monitor the historical Bandwidth on Network and FC Uplinks, Connections to the IOM and Server NICs. Please find the white paper attached which explains steps to configure and use.In the UCSM Manager you can confi...

We do not have to do any changes if the port-profile is setup correctly, UCS VM-FEX will automatically do it and if you are doing VM motion of one VM you will not see 0-3 packets loss if there is any network traffic.

There could be some network problem,  are they multiple uplinks for LAN, try pinning the vNIC to the working uplink for the same VLAN and check, I can take a look if needed.Warm Regards,Madhuemail: msomu@cisco.comPh: 408-218-5134.