Hello - I need some help with fine tuning FCIP between MDS switch to MDS switch.We have 2 x  cisco MDS 9222i ("4x1GE IPS, 18x1/2/4Gbps FC/Sup2") one at production other at DR.Both datacentres are connected with dedicated point-to-point with 10 Gbps f...

Hi I have a problem between UCS FI and MDS switch port-channel. When MDS-A is powered down the port-channel fails but UCS blade vHBA does not detect the failure of the port-chanel on UCS-FI and leaves the vHBA online. However, if there is no port-cha...

HelloI am need of some help to get Nexus 1000V working in my lab. Lab is made out of (see attached diagram) and also included screenshot of DVS within vCenter server.Physical server runing VMware ESXi 4.1 - this is standalon server. runinng following...