I have a Cisco 2901 ISR running CUCME with the VIC-4FXS/DID for fax machine. Calls are coming in via T1 PRI. What configurations are needed to add a fax machine in one of the FXS port and get it working? I already have all the phones in the system wo...
I have four digits extension. What are the translation rules and profiles are needed and how they are applied to the dial-peers so that I will be able to make calls to the PSTN number. In my understanding, I would create two translation rules: One fo...
I am using Cisco 2901 router (CME) with Cisco 7841 SIP Phones. These phone should be able to make conference calls. I think three users can conference with each other by default because I haven't done any configuration and it still works. But the pro...
Hello Everyone,
I am using CME-CUE with 7841 SIP phones. I have all the configurations done for the voicemail. When dialing into the voicemail, it starts with the prompt, " Welcome to CIsco Unity Express.......To record a new name press 1, to keep th...
Am I missing something in the following configs? The phones are able to register but cant make calls to each other? Is there anything I need to add to the config to be able to make calls?
Current configuration : 8173 bytes!! Last configuration change...
Nadeem, I modified the translation rule 2 to :
voice translation-rule 2 rule 2 /.*\(....\)/ /\1/
But is it not doing the same thing as earlier :
voice translation-rule 2 rule 2 /^816...\(....$\)/ /\1/ (sorry that was not 123, I was changing some ...
After adding the configs you recommended I tried making the call and collecting debugs. It still says the call cannot be completed as dialed....
I have attached the debugs if you can find anything. I can't find whats wrong.
I can get the fax number to ring, but after it rings for a while, it says "your call cannot be completed as dialed, please check the number and dial again"
Also, there are no slips and errors.
#show controllers t1 0/0/0T1 0/0/0 is up. Applique type ...
