About bradwilson75

bradwilson75 · 09-07-2020

In the build process, we initially configured the Guest Wireless settings (Security: Open).Provisioned the Fabric and assigned Wireless SSID's to Address Pools (Provision > Fabric > Fabric Site > Host Onboarding > Wireless SSID's)We conducted testing...

bradwilson75 · 09-03-2020

Does/will Embedded Wireless Controller on 9500 switches (co-located Border-Control-EWC) for an SD-Access Fabric-Enabled site support high availability?Not just some floors on one 9500 with some floors on the other 9500, I mean Access Point and client...

bradwilson75 · 08-27-2020

Unable to enable the Embedded WLC on 9500's (Border Nodes) via DNAC.It is stuck in the "Image imported successfully" state and will not progress to the “Image activation” stateI have followed the following guide:https://www.cisco.com/c/dam/en/us/td/d...

bradwilson75 · 08-24-2020

LAN Automation Failing due to PnP ErrorState: ErrorOnboarding State: Connection ErrorHistory Details: NCOB02068: Certificate is not valid (ip/host name does not the match the Common Name or Subject Alternative Name): SSL Server ID check failed after ...

bradwilson75 · 07-10-2019

The Map Information and Calibration Information can be Exported from Cisco Prime Infrastructure and Imported into Cisco DNA Center, but can the Calibration be performed on DNA Center without needing Prime?

bradwilson75 · 12-07-2020

Same problem with upgrading to the latest patch release 1.3.3.9. Disabled and Enabled "DNA Center REST API" to resolve issue.

bradwilson75 · 09-07-2020

I was under the impression once a device had been Provisioned in the Fabric, all other “Provisioning” changes were to be done by DNAC via “Provision > Fabric > Fabric Site …” (which I was obviously wrong ).I have just done a re-provision on the 9500...

bradwilson75 · 09-07-2020

I have a Cisco "SDA Design Training (1.3.0)" slide deck which shows 2 distinctly separate (not stacked) switches labelled as "Embedded Wireless C9k Switch" with the following statements:"Robust HA""Supports 200 APs and 4000 Clients per Site with HA""...

bradwilson75 · 09-03-2020

If your company is like mine, my new laptop is totally locked down so I can not transfer a file using the traditional means (TFTP, FTP, SFTP, SCP).So I had to use HTTPS. Config added to switch:ip http serverip http secure-serverip http authentication...

bradwilson75 · 08-30-2020

Hi @palonso_3 , I am experiencing the same issue and have attempted the "workaround" in the bug description, however, still stuck in the same place.Your steps are different to the bug workaround steps, namely "Upload WLC package to device and activat...

Member Since	‎08-29-2006 11:11 PM
Date Last Visited	‎02-23-2024 12:04 AM
Posts	22
Total Helpful Votes Received	10

User Statistics

User Activity

Wireless setting changes not updated in the SD-Access Fabric by DNAC

SD-Access HA support for 9800 Embedded Wireless Controller (on 9500 Switch)

Unable to enable the Embedded WLC on 9500's (Border Nodes) via DNAC

DNA Center LAN Automation Failing due to PnP Error "Connection Error" Certificate is not valid. SSL Server ID check failed after cert-install.

Performing Calibration to define RF Attenuation model on Cisco DNA Center, without Exporting from Prime Infrastructure?

Re: API not working

Re: Wireless setting changes not updated in the SD-Access Fabric by DNAC

Re: SD-Access Embedded Wireless Support for HA

Re: Cisco DNA Center - Enable embedded wireless controller on Catalyst 9300

Re: Cisco DNA Center - Enable embedded wireless controller on Catalyst 9300