About nygenxny123

nygenxny123 · 01-23-2018

We currently have 2 ISP providers giving us a full routing table for our data center internet access However, we just upgraded one internet link Now we have 300Mb-ISP-A 1Gig-ISP-B After the upgrade I noticed that ISP-A was sending us a default...

nygenxny123 · 03-24-2017

We currently have 2 routers with links to 2 different providers 1 link is MPLS using BGP........with EIGRP being our internal protocol (provider #1) 2nd link is a point to point to our data center. (provider #2) We are adding a 3rd link for VOICE...

nygenxny123 · 03-07-2017

We currently have a few DMVPN sites with no separate Vrf for default routes or internet traffic. What we do have is EIGRP running between the hub and spoke and only allowing internal networks to be advertised via EIGRP and a static default route go...

nygenxny123 · 02-28-2017

We have a 100 meg link to our provider. I was under the impression that QoS is really only applied when the link is saturated We have 3 "bucket" going to the provider... 1 for DSCP EF which gets the "premium bucket" 1 for AF31 which gets "enhanced...

nygenxny123 · 07-01-2016

Yesterday we had an incident where one of our ISP's had a routing issue yet was still advertising routes to us that were unreachable. We have two ASR routers..one dedicated to ISP1 the other dedicated to ISP2 The ASR's are connected to each other v...

nygenxny123 · 03-28-2017

Thanks Julio Your solution worked too. I believe my mistake was using a distribute-list and associating a prefix-list or route map with it directly with it...instead of using an ACL i.e once I configured and a distribute-list pointing to an ACL...

nygenxny123 · 03-27-2017

Hello John, I changed the configuration to distance bgp 171 200 200 and that seemed to do the trick. Although the routes were in my bgp topology table...they weren't in my routing table as far as filtering I tried a prefix list filtering only t...

nygenxny123 · 03-27-2017

Hi Julio Router 2..link 2..Is our point to point...and was considered our primary link to the data center Router 1 link 1 is our MPLS and was the link for other sites Our core switch at the remote site is still using router 1 link 1 MPLS to other...

nygenxny123 · 02-28-2017

thx..I was under the impression QoS kicked in at or close to 100% utilization only

nygenxny123 · 03-22-2016

thanks again Jon

Member Since	‎01-09-2008 06:54 PM
Date Last Visited	‎01-30-2018 02:40 PM
Posts	387
Total Helpful Votes Received	5

User Statistics

User Activity

Default Routes with full BGP Routing table

Preventing routes learned from BGP from being placed in routing table

Benefits of Front Door DMVPN

Help With Understanding this QoS policy

Dual ISP's for internet-changing weight

Thanks Julio

Hello John,

Hi Julio

thx..I was under the

thanks again Jon