About jcp408ADP

jcp408ADP · 09-18-2016

I'm posting this thread is to collect feedback regarding bug CSCuu44261 re: 88XX phones do not notify users which lines contain a voice mail without having the line selected. When the line is selected, there is notification of a voice mail (if one ex...

jcp408ADP · 02-26-2016

If you have deployed or are deploying VPN phones using IOS Router SSL VPN and the router is or being upgraded to IOS 15.3(x), and IOS-XE 3.3, then you will most likely run into the problem described below which causes the the phone to start the negot...

jcp408ADP · 01-24-2015

Did not find anything in Bug Tool or these forums for this so posting as a new question.Environment is multiple stacks of 2960X -48FPD-L switches in different IDF's running IOS 15.0(2)EX5. They were installed new and configured by another party ab...

jcp408ADP · 09-23-2014

This is for CUCM 8.6 with 7945's with SIP image SIP45.9-3-1SR1-1S.When internal call is placed and the called party goes off-hook then sometimes one or the other phone will spontaneously initiate a new call which puts the original call on hold. Add...

jcp408ADP · 10-08-2013

Per the descrition in the subject line .. anyone else run into problems with LDAP not returing users in similar configurations?I'm aware per the System Requirements for Unitiy Connection 9.x document that AD 2012 is not listed as a supported LDAP dir...

jcp408ADP · 11-09-2022

Problem is 6880-X vs 6880-X-LE supervisors. The 'LE' is a big difference.If you have C6880-X-LE supervisor then only C6880-X-LE-16P10G line card is compatible.Likewise, if you have C6880-X supervisor then only C6880-X-16P10G is compatible.

jcp408ADP · 02-05-2020

The blue color conceptual network Visio stencils can be found here

jcp408ADP · 02-28-2017

Cisco BU response to current inquiry regarding direct IM&P integration with Exchange 2016 (aka Office 365) is will be supported in version 12.0 which is due to be released sometime around September 1, 2017..

jcp408ADP · 02-17-2017

Correct answer. Don't forget to restart the XMFaxDriver service after updating the registry.

jcp408ADP · 01-19-2017

Except now as of the August 2016 update to FN - 63972 you can open a TAC case and get the Flex-Stack module RMA'd free of charge. (aka Fix-on-Failure)..

Member Since	‎11-04-2009 11:51 AM
Date Last Visited	‎01-02-2024 04:24 AM
Posts	31
Total Helpful Votes Received	15

User Statistics

User Activity

CSCuu44261 - 88xx Line Voice Mail Indicator

VPN Phones Fail to Connect via IOS 15.3 SSL VPN (webvpn) Gateway - Solution

2960X Stack Fails After reload Command

Spontaeous New Calls When Call is Transferred

Unity Connection 9.1(2) LDAP Integration with AD 2012 in 2008 Mode

Re: the part NO of the chaisis

Re: Where are the latest VISIO stencils for logical network device icons

Cisco BU response to current

Correct answer. Don't forget

Except now as of the August