About KavehSheikh_2

KavehSheikh_2 · 05-18-2017

A recently deployed ASA 5516 with basic configuration is logging a ton of %ASA-7-725011 syslog messages . Here is the specifics to the device: -------- Cisco Adaptive Security Appliance Software Version 9.6(2)13 Device Manager Version 7.6(1) Hardware...

KavehSheikh_2 · 05-07-2015

Hi All,To fix SSLv3 and Poodle vulnerability on ASA 5520 running code 8.2(2), will the command "ssl server-version tlsv1" do the trick or do I have to upgrade the software version? If I can fix this without a software upgrade, it would b great. Whil...

KavehSheikh_2 · 07-27-2012

Hello all,I have always done my port monitoring (SPAN) on Cisco layer 3 switches with no issues. This time I am trying to do this on a Cisco 2901 router:Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M2, RELEASE SOFTWARE (fc...

KavehSheikh_2 · 07-12-2010

I am sure sombody else has encountered this before:I have stack of 5 x 3750 switches configured with several VLANs, no issues. (VTP is set to Server on this stack)I also have an older 3550 which has a trunk interface conneciting to the 3750 stack. (V...

KavehSheikh_2 · 08-15-2006

Hello,I apologize in advance for the lengthy description, but I wanted to give an accurate picture of this scenario.OK, here we go?In order to address company?s need for faster and better connections we are upgrading our WAN infrastructure with some ...

KavehSheikh_2 · 05-23-2017

Agreed. Thank you

KavehSheikh_2 · 05-19-2017

Yes - I think that is the case - How is it possible that a brand new ASA has customized logging buffered setting (?) - Here is the output you requested. Thank you #show run logging logging enablelogging timestamplogging buffer-size 52428800logging as...

KavehSheikh_2 · 05-18-2017

Thanks but..... Here is my logging config - Doesn't seem like ASDM debuging is enabled - In fact the output of command "sh logging asdm" does not include the 725011, so it seems to me the source of these logs is something else. Syslog logging: enable...

KavehSheikh_2 · 05-08-2015

Thank you for the quick response.I will make the config change early next week. Thank you

KavehSheikh_2 · 05-08-2015

Thank you! I believe the "New NAT" was introduced in version 8.3, so upgrading from 8.2.2 to 8.2.5.55 should be straight forward.With that said, according to the page below, I also have to upgrade Any-Connect clients to version 4.x and higher. At thi...

Member Since	‎08-15-2006 06:06 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	17

User Statistics

User Activity

Ton of %ASA-7-725011

To fix SSL3 and Poodle vulnerability on ASA 5520 running code 8.2(2) will the command "ssl server-version tlsv1" do the trick?

Port monitoring on a 2901 router for purpose of packet capture

Trunk between a 3750 stack and a 3550

A configuration question

Agreed. Thank you

Yes - I think that is the

Thanks but..... Here is my

Thank you for the quick

Thank you! I believe the "New