Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi thereseeing very strange behaviour of router router is connected to switch to provide analog when swich configured as trunk the router crash and reboot but when change to access its stable please advice mesh flash:-#- --length-- -----date/time---...
Hi Seeing very strange behaviour my 2811 Router is sitting behind 3650 switch, when the link between switch and router is trunk the router start rebooting itself, to test i changed to access mode then I can see ip address of router on cdp neig de or...
Hi allthanks for advice now router is fixed it was strange one I was sure there is no mem or IOS issue, i changed from on call manager to another and its working fine. router is stable tested all phonesBhushan
Hi allthanks for advice now router is fixed it was strange one I was sure there is no mem or IOS issue, i changed from on call manager to another and its working fine. router is stable tested all phonesBhushan
updated IOS no joy, so removed all the configuration and started from scratch noticed when used below command router crashed there is some command which work with mgcp trunk can someone please advicemgcpmgcp call-agent XX.XX.XX service-type mgcp ve...
Paoloupdated IOS no joy, so removed all the configuration and started from scratch noticed when used below command router crashed there is some command which work with mgcp trunk can someone please advicemgcpmgcp call-agent XX.XX.XX service-type mgcp...
this router is connected to switch and sw to VSAT to test I shut the VSAT interface and change sw to trunk router stopped rebooting and I was able to ping to router and swI dont think its IOS issue could be VSAT causing router to reboot when its trun...
