About tony.skiver

tony.skiver · 09-19-2015

Hi everyone,I have a Comcast wireless gateway, a Cisco 2851 router, HP DL380 (used for VMware and UC applications), and a 3750 switch. I want to be able to run Call Manager and other voice applications, but I think my Comcast wireless gateway is lim...

tony.skiver · 03-27-2018

@Marco Antonio Canales Naveda Yes, I have done it without using the auth URL. Usually this is when you want to add another site there is a centralized CUCM with InformaCast installed currently and SIP integration is not a valid solution. This is w...

tony.skiver · 09-20-2015

Since it's directly connected wouldn't that cover the return traffic? This is from the 2851 router. The IP of the Comcast gateway is 10.25.12.1 /24. The interface connecting to the gateway is 10.25.12.2 /24. Here's what I have:S* 0.0.0.0/0 [1/0]...

tony.skiver · 09-20-2015

Also, I can ping external IP's from inside the 2851, but cannot ping external IP's from anything that is connected into the switch. I can ping all internal IP's from the switch though.

tony.skiver · 09-20-2015

If you mean the 2851 router, then no. I will try that and let you know. I'm not able to modify or access any routing table on the Comcast router. Thank you!

Member Since	‎09-19-2015 08:51 PM
Date Last Visited	‎11-09-2022 12:28 AM
Posts	5

User Statistics

User Activity

Cisco 2851 connection to comcast cable modem

Re: Integrating Basic Cisco Paging (Basic InformaCast) With CUCM

Since it's directly connected

Also, I can ping external IP

If you mean the 2851 router,