About gacgac

gacgac · 08-07-2012

I have a customer connection that I can't change, but I need to connect my network to his.I have a 6509 as my backbone switch with 100's of vlans configured in it. Here is the configuration of the port I am connecting to the customer switch.interface...

gacgac · 07-20-2012

I have a 6509 with 100's of vlans on it, but in this case I am only concerned about 4My default vlan isVLAN 110.168.100.0 /23 with the 6509 interface ip address of 10.168.100.1VLAN 1010.168.110.0 /24 with the 6509 interface ip address of 10.168.110.1...

gacgac · 08-07-2012

Anyone know if I set the native vlan on 2/38 to 176, thus removing it's tagging, and they set the native vlan on their fastethernet3 to 210, also removing it's tagging, would I still get the "vlan mismatch" error?

gacgac · 08-07-2012

Unfortunately I already have a vlan 210 configured for another project so I can't use vlan 210.

gacgac · 08-07-2012

I cannot route, that would violate the emulation of their setup. If I could, I would just hardwire to their lab. But I have no direct runs.

gacgac · 08-07-2012

Is there not a way to set a port to be on a specific vlan, but have no vlan information passed out or received from that port?

gacgac · 08-07-2012

Traffic is regular TCP/IP for monitoring their server in our lab and file share.We already have a vlan 210 in our network so we cannot use 210.They will not change their vlan because this is a mock setup of their remote sites.Basically, I just need t...

Member Since	‎07-20-2012 06:17 AM
Date Last Visited	‎09-05-2018 12:26 AM
Posts	7

User Statistics

User Activity

Help please - Native VLAN mismatch

Difficult PBR question (at least for me)

Help please - Native VLAN mismatch

Help please - Native VLAN mismatch

Help please - Native VLAN mismatch

Help please - Native VLAN mismatch

Help please - Native VLAN mismatch