I am trying to configure a VPN tunnel between my client network 192.168.190.0/24 and a remote site 66.18.106.160/27. I need to NAT all traffic leaving 192.168.190.0/24 to 192.168.191.0/24.Here is my current config:hostname xxxxxdo...
Jennifer,Thanks for your help. Here is the solution. Correct the NAt 0 list as your suggested. And re-confirm (as I had done) that the other end was set for bi-directional tunnel formation.Of course, they canged nothing (wink,wink)Tunnel is up an...
RomanInternalMedicine# sho crypto isakmp sa Active SA: 2 Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)Total IKE SA: 21 IKE Peer: 207.98.229.154 Type : L2L Role : responder Rekey : no ...
OK, here is really strange.I turned on debug and asked that they initiate the traffic. The tunnel came up and traffic now passes. However, if the tunnel times out, I cannot initiate the traffic.Do you still want the Debugs?
no debug info shows.Here is all the other end has sent me: remote LAN - 192.168.191.0/24local LAN - 66.18.106.160/27Gateway - 207.98.218.26Phase 1 Authentication - Pre-Share DH Group - 2 Encryption AES-CBC (...
