About Tilman Schmidt

Tilman Schmidt · 10-21-2013

Copying the configuration from my SG300 switches to my Linux management machine takes a surprising amount of time. Example:sw1#copy startup-config scp://mgmtsrv/sw1.cfg21-Oct-2013 10:35:29 %COPY-I-FILECPY: Files Copy - source URL flash://startup-conf...

Tilman Schmidt · 10-18-2013

The C3750X-24T-S I recently posted about still doesn't offer a usable Web GUI. With no solution in sight, I would like to try a software update.Currently the unit has installed 12.2(55)SE5 universal. I decided to go for the latest 15.2(1)E which s...

Tilman Schmidt · 10-18-2013

I'm configuring a model WS-C3750X-24 running software version 12.2(55)SE5 for scp access in order to back up and update its configuration from a Linux administration server. The necessary commands such as "ip scp server enable" and "aaa authorization...

Tilman Schmidt · 10-17-2013

On a WS-C3750X-24 running software version 12.2(55)SE5 when I try to access the web administration interface with Firefox 17ESR, all I see is an empty 3x4 table with a blue-grey bar at the top and four icons in the first column: a green speech balloo...

Tilman Schmidt · 10-14-2013

Hi,I've got a few SG300-52 switches running software version 1.3.0.62 which I configured for ssh management access with public key authentication via:ip ssh serverip ssh pubkey-auth auto-loginusername mgmt password ... privilege 15crypto key pubke...

Tilman Schmidt · 11-15-2013

Hi all,I've improved my expect script a bit to:allow specifying the SSH user and keyfile on the command lineallow sending configuration mode commandscorrectly handle very long commands (line wrap) and commands producing no outputExtended usage:ciscos...

Tilman Schmidt · 11-11-2013

Thanks for the feedback.Glad I could help.

Tilman Schmidt · 11-07-2013

You defined an ip access-list. Those are for filtering routed traffic, not for controlling access to the switch itself. What's more, it looks like you didn't activate it on any interface (via the access-class command), so it doesn't have any effect a...

Tilman Schmidt · 11-07-2013

You'll need to configure SPAN with VLAN 99 as the source and the port your reporting workstation is connected to as the destination. Otherwise most of the traffic will never reach the reporting workstation.

Tilman Schmidt · 11-06-2013

Wild guess: Could it be that the upper right LEDs actually signal "PoE" on the -28P model and Cisco just didn't bother to create different front panel print masters for the PoE and non-PoE models?I'm used to PoE status being signaled by a LED on more...

Member Since	‎08-09-2012 02:27 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	22
Total Helpful Votes Received	5

User Statistics

User Activity

SG300 scp slow, lots of timeouts

Catalyst 3750X IOS update questions

Catalyst 3750 - Where are ssh and scp documented?

Catalyst 3750 Web Interface Broken

SG300 ssh strange error: "A client is already connected"

Re: SG300 ssh strange error: "A client is already connected"

SG300-10 - Need assistance with ACL

SG300-10 - Need assistance with ACL

Internet bandwidth usage reporting in real time

SG300-28P gigabit LEDs do not light, but SG300-10 gigabit LEDs d