About etxnreg

etxnreg · 09-25-2011

Hi,Trying to setup rip over a l2tp tunnel (ipsec).In the other end I have a windows machine that using the rip listener.Can't get it work.Should it work?Have any some one any ideas how I should do the config?//Niklas

etxnreg · 04-11-2011

Hi,Have an issue that I can't fin the reason for.We have 10 spa942 phones.Some time the phones sending a bye message directly after you have answer the call.It happens approx 5 of 100 incoming calls.Has someone any clue why?Could it be any parameters...

etxnreg · 02-04-2011

HiHave following issueInstead of displaying the user's calling ID, the group number shall be displayed instead.Our sip proxy is fixing this.When I had done that, the problems started.The spa942 will not longer response on the 200 OK.Thats means that ...

etxnreg · 12-29-2010

Hi,Have a question:Have a numbers SPA942 with a group number and a DID number.If I want to make a call transfer between two phones, I must dial the full number to the C-user. reason is that the A-part comes from the PSTN gateway.Is it possible to co...

etxnreg · 10-26-2010

Hi,What command should I use to see how much outgoing traffic is in different queues, when using mls qos?interface GigabitEthernet3/1 no ip address wrr-queue bandwidth percent 18 80 2 wrr-queue cos-map 3 1 1 wrr-queue cos-map 3 2 6 7 mls qos trust...

etxnreg · 08-12-2012

Hi,Unfortently we did not find why we had this problem.BR Niklas

etxnreg · 09-26-2011

Hi,I trying to avoid to have the GW over the tunnel. I.e the PC client should be able to use Internet except for some specific routes.//Niklas

etxnreg · 04-11-2011

Hi,Here is a trace.Grateful for any help//Niklasinput: sip_03880_20110411035342.pcapmatch: 4166325e-be1d174-148e50d6-26b3@sip-gw.abc.netU 2011/04/11 08:27:40.203539 w.w.w.w:5060 -> q.q.q.q:5060INVITE sip:222222222@ser.srv.ip-only.net;user=phone SIP/2...

etxnreg · 02-05-2011

HI again,Have started the debug function in the phone.I got following syslog message after receiving 200 OK02-05-2011 12:09:20 Local2.Debug 192.168.85.4 TP Parser error: 6Has someone any ideas?Will only get this error when a-number has been modified ...

etxnreg · 01-28-2011

Hi again,Have very stupid question.Have added following dial plan : (<100:123456789100>| (<101:123456789101>|The problem is that I can't call any other number, should I add the default part also ?(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxx...

Member Since	‎08-08-2003 12:08 AM
Date Last Visited	‎06-20-2021 11:53 AM
Posts	42

User Statistics

User Activity

rip over l2tp ipsec tunnel asa5505

spa942 sending bye message after answering the call

SPA942,no ACK response at 200 OK when modifying calling number

SPA942 Call transfer

How to print how much traffic goes in different queues when using mls

spa942 sending bye message after answering the call

rip over l2tp ipsec tunnel asa5505

Re: spa942 sending bye message after answering the call

Re: SPA942,no ACK response at 200 OK when modifying calling numb

Re: SPA942 Call transfer