About thedot331

thedot331 · 02-04-2022

Hello, How do we make our Cisco gear reply to DNS lookups? We do NOT want to have the router/switch act as a DNS server, and do NOT want to do hostname lookup from the router/switch itself. We want the opposite - for the Cisco devices to just respond...

thedot331 · 09-10-2018

I have a config that I am trying to bring up, and in my mind it should work, but perhaps I am missing something. The idea is that one end of the link is a layer 3 interface on a router. The other end is a switchport trunk, on a vlan with an IP inte...

thedot331 · 05-17-2018

Hello all, I have a tricky situation. There is a Hunt Pilot configured at 1000, it goes to a Hunt Group with 1 extension (reception). If there is no answer/busy, the settings are to forward to 1003, which is also a Hunt Pilot with a second Hunt Gr...

thedot331 · 02-04-2022

Hello, yes, so for example we have network scanning tools - IPAM, etc, and they pick up the hostnames of our deskptops, printers, servers, VM hosts, etc. but not Cisco devices. Obviously nobody is manually creating DNS entries of every desktop in our...

thedot331 · 05-22-2018

tried enabling the check box, no difference External calls still instantly go to voicemail instead of hunt group, if the line is busy

thedot331 · 05-22-2018

I checked the CSS and everything seems to be in order Is there anything i can do to log this /trace a call in Call Manager and see where the redirect fails?

thedot331 · 05-18-2018

The device is a Cisco 2911, and it's registered as a standard H.323 gateway to our Call Manager, which is at version 11.5 the line coming in is a physical PRI

thedot331 · 05-18-2018

You're correct, it works internally I will check out the CSS

Member Since	‎05-12-2009 09:30 PM
Date Last Visited	‎02-11-2022 12:01 AM
Posts	10

User Statistics

User Activity

Allow Cisco routers/switches reply to DNS lookups as end-points

Connecting Layer 2 switchport to layer 3 port

Hunt Pilot works internally, does not work for outside callers

Re: Allow Cisco routers/switches reply to DNS lookups as end-points

Re: Hunt Pilot works internally, does not work for outside callers

Re: Hunt Pilot works internally, does not work for outside callers

Re: Hunt Pilot works internally, does not work for outside callers

Re: Hunt Pilot works internally, does not work for outside callers