Is there any modules that you can recommend?

Thank you Julio.

Can a 3750E Cisco switch be connected to a 3750 using fiber? and what is required to have this done.

Is it possible to setup a call forward activate and deactivate like *72 and *73 on a cisco IAD so th...

I am attempting to route calls from my IAD to a new SIP switch however calls are getting denied by t...

flash0:c2900-universalk9-mz.SPA.150-1.M8.bin

I am trying to configure a cisco 2911 like my 3800 series but noticed that the command voice service...

show inventory gives me this. NAME: "CISCO2911/K9 chassis", DESCR: "CISCO2911/K9 chassis"PID: CISCO2...

I am trying to get a cisco 2911 with E1/T1 cards installed to take a sip call and make outbound call...

CALL flow SIP------->T1(voice port) when call has any letter in the FROM: field instead of making th...

CALL flow SIP------->T1(voice port) when call has any letter in the FROM: field instead of making th...

Thanks Carlo you wouldnt have the bin file would you I dont have a access to download it..

This is what i am getting:Router(config)#voice service voipRouter(conf-voi-serv)# ip address trusted...

Thank for reply just wanted to explain a bit more.. I have a valid ip on this cisco sending calls to...

Thank you but did not see anything about this in the voice-port Do you know why this router does not...