There are these two switches.1. When connected using the downlink port, the link comes up normally.ex) c1000fe24T(fa1/0/1) ↔ C1000fe48T (fa1/0/1)2. However, if you connect using an uplink port, the link does not come up.ex) c1000fe24T(gi1/0/1) ↔ C100...

My client company replaced the equipment and connected the cable, but I received a message that the link did not live.Only the trunk setting is set.C1000FE-24T-4G-Linterface gi 1/0/1switchport mode trunkC1000FE-48T-4G-Linterface gi 1/0/1switchport mo...

C1000 switch ↔ Notebookc1000 switch is factory initialized yes/no  : noenconf tinterface vlan 1ip address 1.1.1.2 255.255.255.0no sh  PC1.1.1.1 255.255.255.0 After connecting the c1000 switch and the laptop, ping was performed, but the ping does not ...