About Jochen Reinecke

Jochen Reinecke · 05-15-2018

Hi, we have updated a distribution stack of Catalyst 3850 Switches from IOS XE 3.x to IOS XE 16 Fuji. After the successful update we have realised, that Flex Link Support is not included in this Releases. Bad News, because we're searching for a Swi...

Jochen Reinecke · 08-17-2017

Hello Community, i worked on an issue with slow network speed between a site router (Cisco 886) and a Palo Alto Firewall for several days now. The site is using VDSL (in Germany) with about 50Mbit/s Downlink and 10Mbit/s Uplink. Here is the output f...

Jochen Reinecke · 05-09-2017

Hello guys, i like to route between some Multilayer-Switches in our Company. Two of them are oparing in an HSRP-Group for some Client-VLANs. So These Switches only have L2-Connections between them, no routed-ports. I want to connect a third Multila...

Jochen Reinecke · 01-05-2020

If someone is searching for a solution with IOS-XE 16.X-Versions and FlexLinks. The Feature ist just not supported anymore. BTW: It's true. Cisco advise is to use Spanning Tree instead. ;-)Best regards,Jochen

Jochen Reinecke · 07-19-2019

Hi Jason, you can use variables with input if u are using ^ in front and at the end of the variable. Example:^<_VAR>^ As you can read in the Compliance Guide: Fix CLINote This field is available only if you selected User defined Violation Message in ...

Jochen Reinecke · 01-08-2019

Sure you can. Try something like this: show vl br | include (111|222) Best regards!

Jochen Reinecke · 08-17-2017

Hello Georg, thanks for your hint. I have lowered the tcp adjust-mss on dialer Interface but the Speed stays at Maximum of 355 KB/s. The Internet Access is behind the tunnel as you expected. NAT Rule and ACL is cleared for the posting. Regards, Joc...

Jochen Reinecke · 05-09-2017

Hi, i am searching exactly for a solution to forward traffic to SWI3 if the active hsrp router Fails. Regards, Jochen

Member Since	‎09-29-2015 09:31 AM
Date Last Visited	‎09-04-2020 12:05 AM
Posts	9
Total Helpful Votes Received	32

User Statistics

User Activity

Using Flex Links after Catalyst 3850 Fuji Update

Slow Site-VPN Connection between Cisco 886 (integrated Modem) and Palo Alto Firewall

Routing between three ML-Switches (two of them in an HSRP Group)

Re: Using Flex Links after Catalyst 3850 Fuji Update

Re: Prime 3.4 Complaince Job - Fix Inputs

Re: How to use the pipe command include A AND B

Hello Georg,

Hi,