Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,I have a cisco 3825 running 15.1(3) with CME 8.6. I have a sip trunk registered to a voip.ms SIP account and 2 voip.ms DID's that I intend to use for inbound calling to the system. A few things to note right off the bat:Voip.ms SIP accoun...
aokanlawon,When I ran debug voip ccapi inout there was no output when I placed an inbound call.Below is what I got after running debug ccsip messages:Aug 14 13:44:21.770: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:INVITE sip:7736735515@173.16...
amendozar,Thanks for the thorough reply - I added this config to my 3825 (with fingers crossed) and alas, the result was still the same. So far, the only way I've gotten inbound calling to work is with the following config (which in my eyes makes no ...
leonardotadeu,My apologies for the translation rule confusion -- I had obscured the number in the config I posted initially and forgot to change it in my debug that I posted too. My rule is actually exactly as you have posted above
Ok, So I have reconfigured my dial-peers as you show above and have tried placing an inbound call while running another debug voip dialpeer -- same result as before:Aug 13 19:28:07.018: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore: Calling Number=7736735...
