About Japayuki69

Japayuki69 · 08-07-2012

Hi Guys,I am desperate, I think this is just a simple problem but my knowledge to CISCO is not that really deep.Please help!(Note: All Actual IP info are Sanitized)--------------------------------------------------------------------------------------...

Japayuki69 · 08-07-2012

Hello John,I reviewed back your suggestions and found the answer.Gi0/1 interface was just NAT OUT.interface GigabitEthernet0/1description WAN_IP64_AAA_BBB_DDD_192/26ip address AAA.BBB.DDD.193 255.255.255.192ip nat insideip nat outsideip virtual-reass...

Japayuki69 · 08-07-2012

Hi Alessio,Thank you for the reply, tried it as per advise but it seems this is not working.The duplicated ACL were actually part of illustration and should not confused with, it has a lot more IP but was just sanitized.

Japayuki69 · 08-07-2012

Hi John,Thank you for the Swift Reply.My bad and sorry for the confusions.I sanitized the original config too much and I forgot to edit the "access-group" for gi0/0.The original message is now modified.Tried already bothip nat outside source... (usin...

Member Since	‎08-07-2012 01:42 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	4

User Statistics

User Activity

Can PING from any Public/Global IP but cannot PING from any Private IP addresses

Can PING from any Public/Global IP but cannot PING from any Priv

Can PING from any Public/Global IP but cannot PING from any Priv

Can PING from any Public/Global IP but cannot PING from any Priv