I have a ASA 5550 running multiple contexts, but having the AAA authentication serial console (TACACS Server Name) LOCAL allows a tacacs challenge on connecting to the console but I am then unable to issue any commands i.e. enable or Show Run - messa...

After running the FSCK command on the FWSM Disk: I have orphaned files remaining but am now unable to delete them?On running the FSCK command it did ask for confirmation not to delete these files which was default, but as not knowing what this would ...

Under the System area on my FWSM module i run the sh disk: command. At the end I get error message "File Allocation Table might be corrupted, Recommend running fsck dsik:Has anyone run this command on a FWSM Module. can it be run during normal operat...

I have a Cisco 6500 running FWSM version 3.1(10)Have muliple contextsACL's are configured on 2 contexts to allow single hosts to communicate over TCP 7780 (HTTP)No Communication or Denys or Hits on ACL'sReseting the VLAN on source Context temp fixes ...

Does anyone know the minimum and maximum enable password lengths? and the commands to set it on a FWSM Context ?Thanks