About jrickert

jrickert · 11-28-2018

I have an ISR4331 router spitting out two error codes. They appear to occur in pairs, although the first one to show up in the logs is the metadata buffers message. %IOSXE-3-PLATFORM: R0/0: kernel: EXT2-fs (sda1): previous I/O error to superblock det...

jrickert · 11-28-2018

The above error codes are seen in IOS version: isr4300-universalk90.16.07.01.SPA.bin

jrickert · 08-24-2018

When I attempt to kick off the job (from a Linux platform) with the following command: snmpset <router> .1.3.6.1.4.1.9.9.96.1.1.1.1.14.135 i 4 I get the following results: ============================================================= Error in packet ...

jrickert · 08-24-2018

I noticed that the mib known as ".1.3.6.1.4.1.9.9.96.1.1.1.1.14.X" is referenced in several places. As I mentioned in my initial comment, the ISR4331 I am working with (plus 200 more) does not respond to the ".1.3.6.1.4.1.9.9.96.1.1.1.1.14.X i 4" at...

jrickert · 08-23-2018

I have been trying to get this to work for several days off and on. I have come to realize that my ISR4331 doesn't support the .1.3.6.1.4.1.9.9.96.1.1.1.1.14. mib. I can set all the parameters for the TFTP transfer (I have set multiple tasks), but no...

Member Since	‎03-24-2005 05:07 AM
Date Last Visited	‎10-02-2019 11:50 AM
Posts	5

User Statistics

User Activity

CSCvm77197 - C9300 percentIOSXE-2-PLATFORM: Switch 1 R0/0: kernel: EXT2-fs (sda1): error: - 1

Re: CSCvm77197 - C9300 percentIOSXE-2-PLATFORM: Switch 1 R0/0: kernel: EXT2-fs (sda1): error: - 1

Re: How to copy configuration files to and from the Cisco IOS routers that use SNMP

Re: How to copy configuration files to and from the Cisco IOS routers that use SNMP

Re: How to copy configuration files to and from the Cisco IOS routers that use SNMP