Hello all,
I've been doing a lot of reading to really understand how NAT works in ASA version 8.3 and higher. I haven't been able to quite find any documentation that addresses my particular question, so I figured I would try here. I would like it...
Hi all,I would like to setup a SPAN port on my outside interface on the ASA 5505. I would like to see all traffice whether inbound or outbound. Setting up a SPAN port seems pretty straight forward, my question is, if a packet hits the outside inter...
I have a Cisco ASA 5505 that has been configured to act as a router as well. I have configured 3 VLANS that have access to the internet. For some reason the "InsideWifi" and the "Guest" VLANS have very slow internet speeds and sometime web pages...
Does anyone know what the space requirements are for the Cisco Secure Desktop configuration. Each time I try to configure CSD it tells me "the disk is (or was) full during extraction." Looking at my space in flash there is more than enough space un...
Can someone assist me with configuring Cisco AnyConnect VPN? For some reason with the config below, I seem to get connected but then my internet connection randomly drops and reconnects. Ive tried several different times to get this to work properly...
Thank you both dmoudgil and MariusGunnerud for your thorough responses. My question concerning the order of the interfaces comes from some confusion when dealing with pre 8.3 nat statements.
For instances(8.2 nat command):
hostname(config)# stati...
Luis,Thanks for your reply. According to the link below it looks like this can be done on the ASA 5505, using the "switchport monitor" command, since it has switching capability. Am I understanding this correctly or is there something Im not unders...
Here is the partial config I came up with to solve this LDAP issue...ldap attribute-map LDAPMAP map-name memberOf IETF-Radius-Class map-value memberOf CN=MOORE-APP-SSLVPNUsers-DL,OU=Groups,OU=MooreNetwork,DC=moore,DC=net SSLVPNPolicydynamic-access...
