About chris.bowra

chris.bowra · 08-10-2009

Are there recommended settings for the FXO ports on the SPA400; line impedances, transmit & receive gain etc.?I need to interface to a legacy PABX and would like to do so using the SPA9000's FXS ports. The PABX requires line supervision to operate pr...

chris.bowra · 04-02-2009

I upgraded the firmware on my SPA962 to version 6.1.5a from version 6.1.3 and I'm now met with a phone telling me it's in SOS Recovery Mode.How do I get my phone back to a usable state?

chris.bowra · 06-24-2009

Hi Patrick,The sidelined comment referred to the phone being put to the side while other more important things got attention.I've plugged the phone into a different switch and it has recovered quite nicely.I had only tried the PC port reckoning that ...

chris.bowra · 06-03-2009

Hi Patrick,I've just switched it back on, it got sidelined.I have a white screen and the first 4 line keys are orange.The phone is not showing up a link light at the other end, I've tried both PC and WAN ports, so is unlikely to be able to procure an...

chris.bowra · 05-24-2009

Hi Patrick,Apologies for the delayed reply.The utility took the phone out of recovery mode successfully. It stayed there for half an hour or an hour and then spontaneously rebooted. It has not successfully booted since. It seems to get stuck in a rut...

Member Since	‎04-01-2009 08:44 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	5

User Statistics

User Activity

Australian Settings for SPA9000 & SPA400

SPA962 in SOS Recovery Mode

Re: SPA962 in SOS Recovery Mode

Re: SPA962 in SOS Recovery Mode

Re: SPA962 in SOS Recovery Mode