About KarlHenrik001

KarlHenrik001 · 08-19-2009

According to product bulletin no 3209 for the Cisco 4400 series, the Access Point supports 802.11e WMM.My question goes to DSCP mapping, according to IEEE and your bulletin the DSCP field in the IP header should be set to 46 (10110 00) for mapping to...

KarlHenrik001 · 08-24-2009

Thanks for your answer, and I was aware of 802.1p and 802.1Q header, but the Ethernet frame the 4400N receives, as you can see in my previous entry, does not have a 802.1Q field only the DSCP field is set and the 4400N is mapping into QoS for the 801...

KarlHenrik001 · 08-19-2009

Thanks, but my real question was:Which DSCP values maps to Q1 through Q4, in the IEEE documentation DSCP value 46 should map to Q1 but I proved above the 4400N maps to Q2.

Member Since	‎08-19-2009 04:58 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	3

User Statistics

User Activity

DSCP mapping toward 802.11e QoS

Re: DSCP mapping toward 802.11e QoS

Re: DSCP mapping toward 802.11e QoS