About fracjackmac

fracjackmac · 03-07-2024

Thanks for the great recap of #CiscoCommunity at #CiscoLiveEMEA, #CXTeam!!!@@ittybittypacket

fracjackmac · 09-22-2023

Hello @colo,Thanks for the link!I noticed that the latest update was 6 years ago and the Python3 module is based upon Python3.5.Are there any updates available? Are there plans to test the module against a more recent version of Python, possibly 3.1...

fracjackmac · 09-21-2023

Hello @sayeali,Have you tried the following?trans.set_attr(attr=0x00000000,v=_ncs.Value(False),keypath="/devices/device{pe-j0}/config/junos:configuration/system/ntp/server{10.30.10.120}")My assumption is that if you change the "_ncs.Value()" to "Fals...

fracjackmac · 09-21-2023

Hello @rogaglia,I see your command above: trans.set_attr(attr=0x00000000,v=_ncs.Value(True),keypath="/devices/device{pe-j0}/config/junos:configuration/system/ntp/server{10.30.10.120}") However, I'm not familiar with this command and I don't see an im...

fracjackmac · 08-23-2023

The two SFPs are built for different purposes.GLC-LH-SMD operates at 1310 nm and uses single mode fiber.GLC-SX-MM operates at 850 nm and uses multi-mode fiber.If you'd like GLC-LH-SMD to work for your application, you'll need to change the fiber used...

Member Since	‎03-22-2007 01:24 AM
Date Last Visited	‎04-05-2024 12:24 AM
Posts	71
Total Helpful Votes Received	56

User Statistics

User Activity

Re: Meet the Cisco Community and DCX team at #CiscoLiveEMEA 2024!

Re: Python library for Meraki Provisioning API

Re: Junos deactive using Python

Re: Junos deactive using Python

Re: ASR1001-X with GLC-LH-SMD not coming up