Hi everyone,I would really appreciate if someone could help me with this. I have two switches and lagged them together and the port channel passes default vlan and vlan 90. i have interfave vlan 90 with 10.10.2.2 ip address on the ...
Hi everyone,this is my issue, I hope someone can help me with this:i am new to wireless and i have two sites in two diffrenet subnets connecting together by MPLS and I need to have a wireless controller on one site to manage both l...
Hi Everyone,I've been working with VPN for sometime now but I got confused over this senario, can anyone help me on this?i have a firewall and a router behind the firewall is going to route all IP addresses from subnet 10.2.2.0 des...
Hi everyone,I am sooo new to this phone system thing but we are a small business and we hav Cisco IP phones. recently they keep having problems. sometime one of them shut downs and we have to remove the cable and plug it in back to...
Hello everyone,My outside interface on ASA firewall suddenly came down:Interface Ethernet0/0 "outside", is down, line protocol is downcould someone help me with the posible reasons that could cause this? I am remotely connected to it.Thanks so much.
I didn this and still not working, i thought maybe the problem was that the interface vlan was on a different switch, i could not even ping the dhcp server although i could ping the interface vlan 1 ip from the thin client.
Hi everyone,Thank you for all your help on this,ifI want to go with DHCP option 43, and I have APs and the controller other than cisco, can i still go with this option?and how can i find the "option34 sub-option code" and the "vendor class indentifi...
