About japonte

japonte · 08-14-2012

I'm trying to enable port security on several 4507R's. When I try to configure a range of ports the switch will randomly put 1 or 2 in err-disable. It's different every time I apply the config to the same group of ports. However if I do them one at...

japonte · 07-24-2007

I am running an asa5510 with 8.0(2) The problem I am seeing is when I try to connect to a cifs server, through the web portal. I get an error message Access to this resource is blocked for security reasons!After doing a packet capture I found that th...

japonte · 08-16-2012

That did the trick. I put switchport port-security at the bottom and when I applied it to ranges no ports went int err-disable.

japonte · 08-15-2012

Thanks. I'll try that tonigh and let you know.

japonte · 07-13-2007

I have run into the same problem after my upgrade. I did a packet capture and found that the asa is passing the user name as anonymous to the server instead of the actual username I put in.

japonte · 12-19-2003

I'm having the same exact problem. Exept I get the error on port 4/59. Mod 4 is a 9 port gig card.All the suggestions I find would work if the error was comming from a real port.

Member Since	‎12-19-2003 01:38 PM
Date Last Visited	‎12-21-2018 09:51 AM
Posts	6

User Statistics

User Activity

Enabling port security on C4507R shuts down port

ASA sending username Anonymous to CIFS server

Re: Enabling port security on C4507R shuts down port

Re: Enabling port security on C4507R shuts down port

Re: (WEBVPN) CIFS access problem on ASA 8.0.2...

Re: Invalid traffic on port 3/59??? Cisco 5505