About worthingtontech

worthingtontech · 01-17-2022

We are working on replacing our tried-and-true Windows Server VPN with Cisco AnyConnect (ASA 5516-X, ASA version 9.10(1)44), largely for Azure AD MFA. It's working okay, except today we discovered that clients cannot connect when they are a Remote De...

worthingtontech · 07-17-2012

Here is our setup:We have 2 locations. They are connected by a T1 and a new 10 meg fiber connection. Location 1 is the main site. Location 2 gets it's internet, voip, and data over these lines. I have successfully split the traffic going from locatio...

worthingtontech · 08-22-2012

After working with Cisco, I was able to get the correct routing statements. It was PBR, with a routing map that made the next hop the T1. If anyone wants the appropriate lines of code, let me know. Thanks! And thank you very much cadet alain. I appr...

worthingtontech · 07-31-2012

Hi Alain, I was just wondering if you had a chance to look this over. I'm going to start researching and working on the PBR solution with access list, but any assistance you can provide would be much appreciated. Thanks!

worthingtontech · 07-23-2012

Thank you very much for taking an interest in this Alain. Here is the requested information. (I am aware there are some extraneous lines in the routers...we are eventually switching our 2811's to 2911's):Site 1 config:class-map match-any AutoQoS-VoI...

worthingtontech · 07-19-2012

Here are the 2 site networks: 10.1.2.1 (Site 1) 10.1.3.6 (Site 2)Trace from Site 2 to Site 1 DataTracing the route to 10.1.2.711 10.10.3.2 8 msec 4 msec 8 msec2 10.1.2.71 4 msec 8 msec 4 msecTrace from Site 2 to Site 1 InternetTracing the route to 17...

worthingtontech · 07-18-2012

Currently, I don't believe we are. I ran the command above and there was no output. In looking at this article, I think this is what you are referring to, correct? http://fengnet.com/book/cisco.ios.cookbook.2nd/I_0596527225_CHP_5_SECT_8.html

Member Since	‎07-17-2012 11:58 AM
Date Last Visited	‎01-21-2022 12:05 AM
Posts	8

User Statistics

User Activity

AnyConnect - Connect from Remote Desktop

How to seperate traffic over 2 lines using 2811's

How to seperate traffic over 2 lines using 2811's

How to seperate traffic over 2 lines using 2811's

How to seperate traffic over 2 lines using 2811's

How to seperate traffic over 2 lines using 2811's

Re: How to seperate traffic over 2 lines using 2811's