About noahjohnson0

noahjohnson0 · 10-09-2015

Hello,I have the following test setup in my lab [Motorola Set Top Box (STB)] <----> [Residential Gateway (RG) ] <----> [Cisco 3750 Switch g/34] [Cisco 3750 Switch g/44] <---> [Microsoft MediaRoom Server switch (MMR)] When changing channels, the STB r...

noahjohnson0 · 10-19-2015

Okay, so to forward from one VLAN to another and vice-versa I need IGMP Proxy feature, which my switch does not support. Can you provide suggestion for switches that may meet my needs?Thanks!

noahjohnson0 · 10-12-2015

Hi Jon,I apologize for not answering your original question. The server must receive an IGMP join from the host before it will transmit multicast. You are correct that my switch only supports PIM in passive (no sparse-dense) mode.

noahjohnson0 · 10-12-2015

Hi Jon,Thanks for the response. The client sends an IGMP leave for the current channel and then a join for the channel that it wants to switch to. How can I make the Cisco switch transparent to IGMP between the subnets?

noahjohnson0 · 10-09-2015

Hi Reza,I have tried adding ip pim passive to both vlans but I am still experiencing the same behaviour as before. I understand how changing pim or igmp parameters on the switch can affect the traffic, but I am unsure why the mirror span does not sho...

noahjohnson0 · 10-09-2015

Hello,I have set "ip multicast routing distributed." When I try to set the vlan to sparse-dense-mode, I am only presented with the option "ip pim passive":conf tinterface vlan 34only command available is "ip pim passive"Thanks!

Member Since	‎10-09-2015 03:43 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	6

User Statistics

User Activity

3750 Switch does not forward IGMPv3 messages (Multicast questions)

Okay, so to forward from one

Hi Jon,I apologize for not

Hi Jon,Thanks for the

Hi Reza,I have tried adding

Hello,I have set "ip