We have 2 ASA 5540's in active passive failover connected to one of our ISPs. We have other firewalls that have another ISP as their gateway. We want to consolidate and run both ISPs on the ASA 5540s. What I want to do is use the IP address' from the...

I want to start by thanking everyone for taking the time to ready this. We currently have a Fortigate firewall in place. We have multiple VLANS seperating our voip phone system from the rest of our traffic, and we also seperate out our guest wireless...

Currently we have a network that is not physically seperated but seperated using VLANS. Servers and workstations are in a VLAN, IP Phones are in a VLAN. We host a web application for our customers and we would like to seperate the servers that host t...

I have a Cisco Aironet 1252g setup and I have 2 PCs using linksys N adapters connecting to it. Speed is comparable to G. Is there something special I should be doing to improve the speed. I setup the AP within line of site and only about 50 feet away...

I have a 806 running c806-o3sy6-mz.122-4.YH.bin. I need to know what version of IOS image do I need to be able to default router to DHCP (IP ROUTE 0.0.0.0 0.0.0.0 DHCP). I cannot do this with what I have. THanks in advance.