About Michael Halliday

Michael Halliday · 03-08-2017

Hi there, We're having an issue with our CME 11.6 install... we are trying to configure the system so that voice register dn's will not register with our ITSP. This was all working fine until we configured the Mobility services for SNR... which requ...

Michael Halliday · 10-11-2017

Has the Enable Enterprise Image Upgrade option been removed? We just got a 8861-3PCC running sip88xx-11-0-1MPP and we don't have the option to set Enable Enterprise Image Upgrade to Yes. Is it still possible to upgrade this to the enterprise firmware...

Michael Halliday · 03-21-2017

SNR will work without TCP, but the mobility soft key will not, so you can't send a call to your mobile phone or pull it back. At least it didn't work for us over UDP.

Michael Halliday · 03-20-2017

For anyone coming across this... I figured it out. Had to add `session transport tcp` under voice service voip like so: voice service voip ip address trusted list ipv4 x.x.x.x ipv4 y.y.y.y ipv4 z.z.z.z allow-connections h323 to h323 allow-connection...

Michael Halliday · 03-14-2017

Just bumping this... anyone got any ideas??

Michael Halliday · 03-26-2016

Were you every able to find the CME 11 files? I have the same issue.

Member Since	‎03-09-2006 02:02 PM
Date Last Visited	‎09-07-2018 12:03 AM
Posts	7

User Statistics

User Activity

CME 11.6 - SIP phones with tcp session-transport trying to register with ITSP even with no-reg set

Re: 8800 upgrade from 3PCC to Enterprise

SNR will work without TCP,

For anyone coming across this

Just bumping this... anyone

Were you every able to find