to be more clear for OP, i will write one example here! description User Phone & PC Xrd floor switchport access vlan 10 switchport mode access switchport voice vlan 5!best regards,vanguardro
helloi will suppouse, all your switches a part of same vtp domain, and 6500have server role, rest of them have client role in your vtp domain.you can create vlan 251 us your management vlan on 6500 switches:!vlan 251name management!after that you wil...
hello, if OP refer to configured ip address on 6500, then we can use next command:show run | include interface | ip address | descriptionor more explicit oneshow run | include interface | ip address 172.16.30.24 255.255.255.240 | descriptionif OP ref...
helloone simple method will be to use only one vtp domain between your DS1 - DS2 and access switchesalso you can configure vlan 10 and 20 on both DS routers and use HRSP for election processfor example:DS1#!int vlan 10ip add 172.18.10.10 255.255.255....
hello, one method to configure your network, is to have all switches in same vtp domain, for example:sw 3560 can be your server for vtp domain !vtp mode servervtp domain MyNetwork!and on all of your 2960 switches can be clients on this VTP domain!vtp...