About hbaytie01

hbaytie01 · 01-21-2020

Hello Community,In this fast-evolving cybersecurity world nowadays. Can anybody really define in the best attractive way the role of the security devices and their differences that we need to propose to customers? It's like a mess nowadays, you don't...

hbaytie01 · 08-19-2019

Hi, I was wondering if Cisco has a Questionaire table or something alike that we can send to our customers once they have a switching requirement. A lot of them just send that they need a switch that has 24 or 48 port but later on, we discover that t...

hbaytie01 · 07-09-2018

Hi, I have a 68XX core switch and i have a requirement to login using MFA. I came out with a conclusion that it must be done through ISE server. We already have a radius server which is integrated with an MFA server and we're already using it for F...

hbaytie01 · 05-18-2018

Hi, I configured Wireless Guest using Cisco ISE 2.0 Wireless Guest Setup Wizard, everything looks okay regrading the configuration and the user wants he connects to the WLAN he is able to self register his self and gets the password. After he enter...

hbaytie01 · 04-29-2018

Hi, I have a core switch which has two supervisors as shown below: ---------------------------------------------------------------------- #show moduleChassis Type : WS-C4510R+E Power consumed by backplane : 40 Watts Mod Ports Card Type Model Serial...

hbaytie01 · 08-19-2019

thanks

hbaytie01 · 08-19-2019

Hello Giuseppe, You're totally right about meeting the customer which is always the best way in many matters. However, sometimes you just get looped in an email requesting maybe a couple of switches which just needs something fast and somehow precise...

hbaytie01 · 10-17-2018

If the AP is in FlexConnect mode, then you have to make sure that the configuration on the switchport is mode trunk with the native VLAN to be the management. I faced this issue once I have my flexConnect AP and the switchport mode was access, i wasn...

hbaytie01 · 05-20-2018

The CoA feature wasn't enabled in the Radius Server WLC:

hbaytie01 · 04-19-2018

Regarding the LLDP, I don't think it is causing a problem since once we remove the two cables(Ether-Channel) and connect one cable(Trunk), everything will work normally. For the EtherChannel configuration, it is a normal trunk same as the rest of fl...

Member Since	‎05-19-2015 07:00 AM
Date Last Visited	‎07-18-2021 11:57 AM
Posts	23

User Statistics

User Activity

Security Solutions Differentiators

Switch Questionnaire for Pre-Sales to ask customers

Login to Cisco Core Switch through MFA Via ISE

Wireless Guest is stuck in Sponsor Guest Portal after he authenticates successfully and browses anything online

Core Switch 4510 Swap Secondary Supervisor to another Core Switch

Re: Switch Questionnaire for Pre-Sales to ask customers

Re: Switch Questionnaire for Pre-Sales to ask customers

Re: Access Points do not show in CDP neighbor

Re: Wireless Guest is stuck in Sponsor Guest Portal after he authenticates successfully and browses anything online

Re: Moving from PVST+ to Rapid PVST+