About humpix

humpix · 04-03-2024

Hello everyone,After a day of trying, I just can't get any further. Perhaps one of you has an idea...I have c2960x switches with one of the ports set to trunk:interface GigabitEthernet1/0/3description Trunk Port IT Officeswitchport trunk allowed vlan...

humpix · 04-05-2024

I think I have solved the problem.If I don't set an IP as above and the switch gets one via DHCP, everything works. If I then just create a new IP in VLAN 10, enter the gateway via Telnet and then delete the DHCP entry in the IPv4 setting, everything...

humpix · 04-04-2024

Hello Rick,Thanks for the tip. It must have something to do with the IPs. If I set everything VLAN related the same, but don't play around with the IPs at all, everything works. Now the CBS250 just pulls a IP from the DHCP over VLAN1 and everything w...

Member Since	‎04-03-2024 05:55 AM
Date Last Visited	‎04-05-2024 12:24 AM
Posts	3

User Statistics

User Activity

Cisco Business 250 (CBS250-8T-D) Mainswitch -> Trunk -> VLAN? HowTo?

Re: Cisco Business 250 (CBS250-8T-D) Mainswitch -> Trunk -> VLAN

Re: Cisco Business 250 (CBS250-8T-D) Mainswitch -> Trunk -> VLAN