About mecharek1

mecharek1 · 09-29-2021

Hican someone guide me in the configuration of the web bridge 3 on cms 3.2I can't find a document that explains the c2w trusthere is the error message that appears:C2W Peer 7FED30023560 failed TLS handshake with error: self signed certificateC2W conn...

mecharek1 · 09-28-2020

I installed a new ASR 1000-RP1 card on my ASR 1006 router but after decompressing the IOS image it displays the following message: %IOSXEBOOT-4-BOOT_SRC: (rp/0): Non-HD Boot%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (local/local): configure_sysinit_rp too...

mecharek1 · 06-24-2018

Hi; I created a new zone in my old VCS version 7.2.2 A524 ***** to interconnect it with a new VCS version 8.10.x for H323 it's ok but for sip tls I have this message that s displays "TLS negotiation failure". I check the server certificate it has exp...

mecharek1 · 02-08-2018

Hi ; I deployed a CUCME for one of our clients with CoR list restriction so that nobody can call the BOSS but apart from his assistant.But sometimes she wants to transfer some call to the BOOS ; oops it does not work, a message that says "can not tra...

mecharek1 · 10-16-2017

We have and issue with 3 new VCS appliance, after the power on at first boot the system stuck at the level as showed in the PDF attachement and there is no prompt for installation wizard.

mecharek1 · 10-11-2021

Hi, I checked all the configuration I even configured the second call bridge but still the same problemI read in other discussion that you need to set these parameters (client authentication, server authentication) in the template when you publish th...

mecharek1 · 10-06-2021

Hi winter; yes each callbridge reaches the IP of the webbridge Only the first callbridge trusts the self-signed webbridge certificate No I did not select the callbridge group in the API for the webbridge, I added the url of the first only "c2w: // <I...

mecharek1 · 10-06-2021

Hi Winter, Thank you for your precious help I generated another certificate and I redone the configuration following your examplenow I'm back on another problem:2021-10-05 12: 01: 33.545 Connection to remote Call Bridge "Cb02" failed (connect failure...

mecharek1 · 10-05-2021

Hi winter Yes i have configured the webbridge3 correctly? (webbridge3 c2w listen a:9999) But i don't have set the CN to the IP address? Please i put what on <name> ? Best Regards

mecharek1 · 09-29-2020

Hi Leo; it purchased from a Cisco partner in packaging with a 4GB RAM and a 40Gb hard drive preinstalled,I tried with another RAM it's the same thing. Regards;

Member Since	‎05-21-2015 10:32 AM
Date Last Visited	‎02-07-2022 12:10 AM
Posts	53
Total Helpful Votes Received	15

User Statistics

User Activity

Webbridge 3 CMS 3.2.2 issue

ASR1006 Route Processor RP1 Boot issue

Interconnect two VCS system issue - TLS negotiation failure

Call transfer issue with COR list restriction

Cisco VCS Appliance CE1100 first boot issue

Re: Webbridge 3 CMS 3.2.2 issue

Re: Webbridge 3 CMS 3.2.2 issue

Re: Webbridge 3 CMS 3.2.2 issue

Re: Webbridge 3 CMS 3.2.2 issue

Re: ASR1006 Route Processor RP1 Boot issue