Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This issue is now resolved. In my case, my CPI was on a subnet other than the management subent that the WLC pair is on. I also have a dynamic interface configured on the WLC that is using the same subnet as the CPI server.I found this obscure post...
Having the same issue.Using an HA pair of 5508s running 7.6.110 and CPI 1.4 update 1.I have an active TAC case and they are not making any progress on determining the issue. :/-mj
I had a VERY similar issue a couple of days ago. In my case, my operator phone has a 10-digit extension. However, I had CUEAC configured (User Config -> General Properties) "Maximum internal device digit length" set to four. I also had an external...
I was just fighting this very issue. I tried absolutlely everything (including a server rebuild).In my case, CTI/CUCM traces revealed that when CUEAC was trying to xfer the call to the phone, it was pre-pending a 9 to the extension. I have a 10-dig...
