Packets with destination IP and MAC address of the SVI on a vPC peer switch are not forwarded over the Peer-link when received on the other switch on a Nexus 5600 running NX/OS 7.0(2)N1(1). Regardless of the "peer-gateway" setting in the VPC domain.S...
Hello,Having a Cat6500-E with SUP720/MSFC3 and a 7600-SSC-400 with two SPA-IPSEC-2G crypto cards.The old IOS (12.2(18)SXF8, old but stable) was working for years with crypto transform set of AH and ESP crypto ipsec transform-set myts ah-sha-hmac ...
There is very little and quite diverse Information regarding the if, where and how of a Nexus 5000 or 5500 series Switch and support for IEEE 802.1AE Link Layer Encryption (also called MACsec).For example: the official FAQ denies that the Nexus 5500-...
A Nexus 5010 running NX/OS 5.0(2)N2(1) with the following featuresno feature telnetno telnet server enableno feature http-serverfeature tacacs+cfs eth distributefeature udldfeature interface-vlanfeature lacpfeature lldpfeature fexand an active NTP an...
The COMP-LZS ipsec transform is still not supported on ASR 1000 series.The latest IOS XE release (3.5.2S3) added an Error Message to indicate that this feature is not supported on ASR hardware.
Apparently this bug has re-appeared in ACS 5.2 (5.2.0.26). ACS re-uses stale TCP connections many hours after the last TCP packet was sent.It also uses different TCP connections for LDAP search queries and the subsequent authentication bind requests,...
Hi,Are these packet dropped (as in: not fowarded by IP layer 3 forwarding) in default configuration?And what exactly are "address reserved" reserved addresses - which are also "dropped" in default configuration?
