Cisco 7600, ES+ card.So I have two GigE ports. Ge1/6 and Ge1/7. Ge1/6 is a port where I have bunch of sub interfaces created each with unique vlan id. For Example below. interface GigabitEthernet1/6.3119 encapsulation dot1Q 3119Ge1/7 is a trunk...
Hello... I am trying to push traffic onto an LSP thats mutiple paths created as below. interface Tunnel3080 ip unnumbered Loopback0 tunnel destination 10.253.253.136 tunnel mode mpls traffic-eng tunnel mpls traffic-eng path-option 11 explicit name ...
Sorry guys.. I didn't get a chance to test this as they pulled the routers off the lab. I can't do it in the production network. Let me know if anyone of you happened to do so. I"ll try to to test it when I get a chance or get my lab router back....
I tried with no ToS.. and i think it works.. the ping doesn't work but when I do traceroutes the route-map shows the matches, and traceroute goes using the path I have in the tunnel.So.. without ToS it works, but there is no point.. as I wanted...
VLAN503 is the interface from which traffic is coming in, and I want that traffic to ride over the Tunnel. VLAN 503 is the SVI interface with an IP address /30, so its actually routed. The router with the other end of that /30 is actually has a st...