Hi ,I've a pair of ASA 5540 used as firewalls. Recently the Secondary unit becomes ACTIVE for unknown reasons. So I apply the CLI "no failover active" to make the Primary active. But a little later, the Secondary appears again active. I did it severa...
Hi,I got an error message on my C2821 with 12.4(13r)T as follow:%CRYPTO-4-PKT_REPLAY_ERR: decrypt: replay check failed connection id=16, sequence number=2050From Cisco website, the solution is to change the SA window size larger (eg. 1024). I'...
Hi all,We use ASA 5200 as a VPN concentrator with more than 50 VPN tunnels running on it. Now we'd like to implemente NTP to get time from an external server in DMZ. My question is:- if I activate the NTP feature on ASA, will it reset all the current...
Hi,I've a C3750G with 12.2(50)IP-Base IOS version. I'd like to use Wake-on-lan feature on the LAN but it failed to work.So I checked on Cisco website, they said it should work with the minimum version 12.2(25)SEC.I wonder to know if my version suppor...
Hi,This is a C3750G L2/L3 switch and is configured by IP DIRECTED BROADCAST. Do you mean that it shouldn't be the IOS version issue, but a conf issue ?Regards,H.H.
