I have a AIR-AP1131AG-K-K9 installed in Korea and it's configured in LWAPP/HREAP mode. All laptops can connect to the 802.11bg radio. Some laptops can connect to the 802.11a radio but no Lenovo T61 or X61 laptops can connect to the 802.11a network. T...
I'm trying to configure the ASA appliance so that a user will be dynamically placed into a particular tunnel group based on an attribute returned from Cisco Secure ACS when the user is authenticated. I have been able to accomplish this on the Cisco V...
I'm working on a new DMVPN configuration with one 3745 at the hub site and a 1711 the spoke. I have DSL/PPPoE for the primary line at the spoke and a POTs line for dial backup. I have two tunnel interfaces on both the hub and the spoke. Upon failure ...
Does anyone have any experience using a short-haul modem to extend the distance between a console port and a terminal server? Can you share your experiences? Which products worked? Which should be avoided?
Does anyone know of documentation specifying the maximum lenght for console cables? Does anyone know how to increase the cable distance beyond to normal accepted maximum?Thanks,
Danny,DSL in China is pretty much like DSL here in the US. The service will be delivered on a plain telephone line. The local telco will provide a DSL modem and an ethernet hand-off. You can get fixed IP public addressing or take a dynamic IP. You ca...
I'm trying to do the same thing and it sounds like you're having the same problems I am. I don't think the feature is supported when the ACS internal database is used. I'm still seeking a resolution and will post it if I come up with anything.