Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to upgrade the IOS on a 4507 to support the new WS-4248-RJ45V. It currently has:IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.1(19)EW1,EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)I need at least 12.2(18)EW. That version is...
Can any one tell me if the switchport blades in the 4500 series (or 6500 series for that matter) are hot swappable? I have to add two more WS-X4248-RJ45V blades to an existing 4507 and I'm wondering if I'll need to shut that switch down (after hour...
We're using this product from Acronis called Snap Deploy, used for imaging workstations. Products like Snap Deploy and Ghost can use multicasting to send out an image to multiple stations at once.I ran into a problem with this at a rather large clie...
I'm pretty sure this is a simple problem whose resolution I am overlooking. I just added a new VLAN to a 6513. VLAN 241 shows as active and looks no different from any other VLAN when I execute show vlan on the switch. The correct ports are shown ...
I should probably add that the file size between the original bin and the new bin are 3004156 vs. 9044204 respectively so I am assuming that this is not the correct image for my 4507. I'm currently downloading 12.2.18-EW7(ED) and the file size is mu...
Good deal, thanks for the info! Guess I was searching incorrectly I had assumed that 1 and 2 were reserved, thanks for confirming before they bought the second line card
Oh, one other question I guess I should ask:The blade bays that are currently empty in this device is modules 2 and 7. Are both of these OK to use for adding blades or is one or all used for any other devices (i.e. the supervisor). According to the...
10.30.100.20 is the default route.show ip route 10.30.100.20:Routing entry for 10.30.0.0/16 Known via "connected", distance 0, metric 0 (connected, via interface) Redistributing via eigrp 100 Routing Descriptor Blocks: * directly connected, via V...
