About user889988

user889988 · 09-13-2015

Hi,I have a C887VA-W with integrated AP802 (equivalent to 1140 or 3500 series AP) supporting 2x3:2 configuration as far as I know.I'm doing speed tests from a wired FTP server on the LAN to an iPad Air 2 using 802.11n 2.4GHz. I can see the iPad assoc...

user889988 · 09-17-2015

Ok, success.I think that I've figured this one out on my own and gathered some very interesting info.I've now tested with a laptop featuring a Broadcom BCM943228HM4L 2x2 wifi chipset connecting with m15 data rate (writing to its fast SSD) and was abl...

user889988 · 09-13-2015

Hi Leo,I know about that document but I don't believe that's the reason in this case. Reason being is that I've had this router do 74Mbps inter-vlan routing with NAT enabled.

user889988 · 07-03-2015

I'm not from the UK but another thing to mention is if they enabled the G.Vector standard on the DSLAM (aka ITU-T G.993.5) then the modem firmware needs to be 38h or above to support it.IMHO, I would just grab the latest firmware they have out since ...

user889988 · 05-29-2015

Hey,You probably fixed this by now but I notice that you're using the embedded DSL firmware that comes with IOS. According to the output from your sh controller vdsl 0Firmware Source File Name (version)-------- ------ ------------...

Member Since	‎05-28-2015 11:56 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	5

User Statistics

User Activity

Wifi performance on C887VA-W with iPad Air 2

Ok, success.I think that I've

Hi Leo,I know about that

I'm not from the UK but

Hey,You probably fixed this