Hi Kick534,
LACP will bundle up to 8 ports (active) what you are configuring with ""lacp max-bundle 4" is that each of your port-channels will allow up to 4 physical ports to form the port-channel.
Hope this helps!
Jaime Saldaña
Cisco Systems
Hola,
Para nivel profesional tines las siguientes opciones:
Hacer un examen de core (Ent, Sec, DC, SP, Col, Devnet, Cyber)Hacer dos exámenes de concentración (En tu caso como es ENT puede ser Advance routing, SD-WAN, Design, Wireless design, implem...
Hi Zhiqiang,
As per the " Cisco CSR 1000v and Cisco ISRv Software Configuration Guide " the supported ESXi are 6.5 and 6.7.
The following table specifies the supported VMware tools by Cisco CSR 1000V using Cisco IOS XE Amsterdam 17.x releases:
...
Hi CiscoBlueBelt,
Yes Netflow will work with VRF's.
interface GigabitEthernet0
ip vrf forwarding test
ip address 1.1.1.1 255.255.255.252
ip flow monitor test output
Regards,
Jaime Saldana
Hi TaniaMartinez0003,
For the configuration stand point? You need to configure a voice vlan and data vlan like
int gi 1/1
switchport mode access
switch access vlan X
switch voice vlan Y
If you Catalyst 2960 supports PoE it can be power up any d...