About jfnz

jfnz · 02-19-2012

Hi allSo I've dug myself a rather sizeable hole trying to get the intregrated AP in my 887W working.A long story short, when trying to upgrade the firmware I accidentally put the LWAP firmware on. I couldn't work out how to correct this so from the A...

jfnz · 07-25-2010

Hi all.Is there any such thing as an ADSL2+ module that's compatible with the Cisco 3725 router?I know there is the WIC-1DSL module, however that is only G.DMT compatible. I also know there is the HWIC-1ADSL module as well, however from the documenta...

jfnz · 02-19-2012

The router does, but as far as I know there's no way to mount the USB filesystem inside the integrated AP.What I mean by that, is that you enter the AP via the 'service-module' command, and (I believe) the router reverse telnet's in to the AP via an ...

jfnz · 02-19-2012

Hi EugenThanks for that, though I'm still stuck getting communication between the switchports in the back of the router and the integrated AP.If you read the part of my post specifically relating to the lack of the BVI interface you'll see what I mea...

jfnz · 07-25-2010

Hey Maria.Yeah, that is strange.I wonder if it would be worthwhile running Wireshark in the background while running the pings/TFTP connection attempts? That way you can see if you're discarding packets for one reason or another or if something simil...

jfnz · 07-25-2010

Try from another host on the network to ping your laptop, it's probably not responsive to ICMP for one reason or another.Also, why do you really care whether ICMP is working? If you can get replies there is obviously 2 way connectivity and I'd be wil...

jfnz · 07-21-2010

Fair point, although one could debate whether they'd be hanging off the same switch port (unless there were a switch or hub downstream from the switch you're looking at of course).

Member Since	‎07-20-2010 01:59 AM
Date Last Visited	‎10-07-2024 02:23 PM
Posts	10

User Statistics

User Activity

Help with 887W integrated AP

Cisco 3725 & ADSL2+ Modules

Re: Help with 887W integrated AP

Help with 887W integrated AP

Re: Performing and IOS upgrade, but having trouble between lapto

Re: Performing and IOS upgrade, but having trouble between lapto

Re: How to tell if there is more than one device on a switch por