About robinjellum

robinjellum · 10-14-2008

I have a site that is running 4.2.130 with Vocera Badges. Sometimes the AP sends retries and then floods of RTS packets (up to 32) to the Badge. Is there a way to limit the number of retries and CTS packets that get sent out? The default is way to...

robinjellum · 06-10-2009

I don't think that 5.2 supports the 1000 series APs.

robinjellum · 02-25-2009

Slight correction. If two APs on the same channel can decode each others 802.11 signal, it is not noise. If the signal is degraded such that it cannot be understood, it is noise.

robinjellum · 01-19-2009

Bruce,We are running at 4.2.x code and I only see CTS-Self. The only time I see RTS-CTS is after the AP retries a packet 8 times. It then follows that up with up to 32 RTSs.-r-

robinjellum · 01-09-2009

Protection will be enabled if:1) There is a 11b STA associated to an 11g AP2) An 11g AP on the same channel has protection enabled.If your 11g (not in g-only mode) AP is on channel 11 AND you have a neighboring AP that is also on channel 11 that AP i...

robinjellum · 10-16-2008

The RTS / CTS packets are sent without BSSID info and without to DS / from DS designation (Ad Hoc) so that all devices on channel that can hear the packets will respect the NAV.

Member Since	‎03-01-2006 09:25 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	6
Total Helpful Votes Received	15

User Statistics

User Activity

LWAPP 4.2.130 Retry mechanism

Re: Wireless Controller 4402

Re: What is signal / noise?

Re: 802.11b and 802.11g in same channel

Re: 802.11b and 802.11g in same channel

Re: RTS/CTS -unicast or broadcast + Random backoff time